Material Level Sensors

Level Sensor A device used to detect or measure the level of liquid, gas or solids within a pipe or tank, or a device used to detect the interface between different materials.

• Dry Material Level Sensors (powder)

  (55 Suppliers)

  Dry material (powder) level sensors are used to measure the level of solids and dry matter, either continuously or as point values ​​represented by various output options.

• Dry Material Level Switch (powder)

  (28 Suppliers)

  Dry material (powder) level switches are used to measure the level of dry solid materials through electrical switching action.

• Material Level Controller

  (75 Suppliers)

  Level controllers monitor, regulate and control the level of dry or liquid materials.

• Material Level Meter

  (38 Suppliers)

  A level gauge is an industrial instrument used to determine the level of liquid in a fixed storage tank or process tank.

• Material Level Sensors

  (477 Suppliers)

  Level sensors are used to detect the level of liquids or powders, or the interface between liquids. There are two basic level measurement types: continuous and point or multipoint.

• Material Level Switch

  (67 Suppliers)

  Material level switches are mainly used to measure the high, low or intermediate material levels of containers and storage tanks. They are installed at fixed points on the top, side and bottom of the silo through threads or flanges, including paddle level switches and tuning forks. Material level switch, capacitive material level switch, radio frequency admittance material level switch, etc.

• Level Transmitter

  (35 Suppliers)

  Level transmitters are used to measure the level of liquid or bulk solid materials (as well as slurries) within a defined space. For each measurement, they provide an electrical output proportional to the level measurement.

• Leakage Detector

  (48 Suppliers)

  Liquid leak detectors detect when liquid leaks from pipes, tanks or other containers.

• Liquid Level Float

  (5 Suppliers)

  Liquid level floats, sometimes called floats, are spherical, cylindrical, and similar shaped objects made of rigid or non-rigid materials used for buoyancy in water and other liquids. They are used for surface calibration, level measurement, flow control, cable holders and UV blocking. They can also be designed to be integrated with valves, switches or fluid instrumentation mechanical components to control or monitor fluid levels and tank volumes.

• Liquid Level Sensors

  (371 Suppliers)

  Level sensors are used to detect fluid levels, interfaces between liquids such as oil and water, or liquids and solids.

• Liquid Level Switches

  (119 Suppliers)

  Level switches are used to detect specific fluid levels or interfaces between fluids. These level measurements are indicated by electrical switch action.